Specifications of Universal Counters:

• Display : 16 x 2 line LCD display.
• No. of digits : Maximum 8 Digits.
• Maximum Speed of count : 200 counts / Sec.
• Minimum pulse width of pulse : 1 mesc.
• Counting Method : Up counting.
• Control O/P. : 1 c/o relay contact rated at 3A/230 VAC
• Settings : All setting by keyboard.

Input Pulse:

• 230 VAC/110 VAC pulse through contactor or limit switch.
• 10-30V DC Proximity switches three wires PNP-NO-type.
• Any 10-30 VDC pulse.

Reset Methods:

• Manual reset by key-always valid.
• Auto reset – If selected, Auto reset time programmable by keyboard.
• Power on reset, if selected count will reset to all zero at power on & count will start from zero.
• Power on reset & auto reset – if selected, combination of B & C.

Count Display:

• Set value : 8 digits.
• Actual value : 8 digits.
• Total Count : 8 digits
• Batch Count : 4 digits.
• Count Memory : count memory for a) Actual Count
• Total Count and Batch Count
• Terminations : All terminations for supply, relay, pulse input etc. at back of unit.
• Keyboard : All setting & display page change through keyboards only.
• Power : 230 VAC /- 10%, 50 Hz, Single Phase or 24VDC
• Size : a) Overall : 96 x 96 x 120 mm
• Cut Out : 90 x 90 mm
• Options : a) External Reset - By 230V AC Pulse or 24VDC Pulse
• Extra Alarm Output - one N.O.C. relay contact for additional alarm O/P.